FLATLINER
Flatliners are the finest and most versatile Pedalboard Power Supplies for guitar and bass effects on the market.
All isolated outlets
Many power supplies have outlets that share the same ground. This will cause HUM. All outlets of the Flatliners are all fully isolated. We use toroidal transformers that will guarantee that your pedals will not HUM.
Power
Because many new effects-designs need more and more power we provided each DC outlet of the Flatliner Pro to supply 200mA current. The AC outlet even supplies 1000mA. For musicians who prefer more compact setups with common effects we designed the Flatliner SIX which features 6 all adjustable DC outlets in a very compact chassis.
Flexibility
All Flatliners are flexibel. They can handle all battery-operating effects that require 9, 12, 15, 18 and even 24 VDC and the Flatliner PRO powers almost every effect that needs special power requirements like the Digitech Whammy, Pigtronix, Empress, Boomerang, Kingsley, as well as various tube-driven pedals.
We even made a mod for Radial Tonebone effects pedals that use 15 VDC+ and the Mooger Fooger (104 and 105) pedals that normally cannot be powered by multioutlet-powersupplies.
Checkout our list with effects pedal brands and mods for the Flatliner PRO
Many guitar players use a myriad of different analog- and modern digital effects pedals. Most of these run on 9V batteries, which don't last long and are an ongoing expense to replace. An adaptor is a common solution and a good alternative, however using several pedals together will inevitably result in a jumble of cables. Alternatively a hum-free adaptor is an expensive option and may only power a few pedals. Although most effects pedals need 9V supply, there is now an increasing number of pedals that need 12 or 18V and draw higher current.
For this reason you need special adaptors.
Burkey noticed these problems and came up with a solution:
One central power supply that can power almost every effects pedal in the world.
The Flatliner Pro is specifically designed for use with pedalboards. Its compact, rugged and virtually indestructible build quality will guarantee many years of carefree power supply. No more flat batteries or humming adaptors. No tangled mess of cables on the floor. With our Flatliner you will have a well-organised and reliable power supply setup ready for the wildest performances.
The FLATLINER features 9 completely isolated outputs, ready to power a large pedalboard. Voltages may vary from 3-24 V DC and the FLATLINER can even power 9/12 VAC pedals.
|
Specifications
|
|
9V DC
|
5 Outputs 9 Volt DC, 200 mA, short-circuit protected with a current-limitation on 200 mA |
|
12V DC
|
1 Output 12 Volt DC, 200 mA, short-circuit protected with a current-limitation on 200 mA |
|
3-9V DC
|
1 Output variable ca. 3-9 Volt ; V = voltage, R = resistance ( 0…20 Ohm) |
|
3-12V DC
|
1 Output variable ca. 3-12 Volt ; V = voltage, R = resistance ( 0…20 Ohm) |
|
9/12V AC
|
1 Output 9 or 12VAC*, capacity 1000 mA This output is protected with a 1AT fuse (on the rear panel) |
|
Polarity
|
All outputs are centre negative |
|
Fuses
|
1AT:1A-fuse (9VAC output)
230/240V:2 x 250mAT ----- 115/120V: 2 x 500mAT
|
|
Mains
|
230VAC 50/60Hz for European power. Configurable for 120VAC/60hz for US power |
|
Capacity
|
33 Watts max |
|
Weight
|
1960 gr |
|
Dimensions
|
(LDH)233x110x72 mm |
|
Warranty
|
24 months |
Power Features ( chart )
Standard 9V
De FLATLINER has 8 DC outputs for the use of 5.5x2.5 mm barrel connectors (Boss-type). These are standard connectors which fit most Ibanez and all Boss, Voodoo Lab and many others.
Polarity
The 8 DC-outputs are centre-negative , a standard for effects pedals.
Some pedals have reversed polarity (Fulltone '69 en Octafuzz). To prevent damage to your pedal it is important to check the polarity of the input jack of the pedal. A special cross-cable is provided with the FLATLINER to connect to a center positive effectpedal. If you need more cables you can order them on the BURKEY website.
12 VDC
Some pedals need higher voltage supply. Examples are: Boss ACA-type pedals made before August 1997. These need 12VDC to run properly. All Boss PSA-type pedals and post-August 1997 pedals can be run from the 9VDC outlets.
18V/24VDC
Because all outputs are isolated it is possible to join two 9VDC or 12 VDC outputs in a serial connection to double the voltage to 18 or 24 VDC or a parallel connection to double the current to 400mA. For this you need a special Y-cable which you can order from our on-line store.
9/12 VAC
Most tube-driven pedals need AC power. FLATLINER V 2.0 can be configured to 12 VAC, instead of standard 9VAC. Other brands that require AC power are EHX (Wiggler, Tubezipper), Mesa Boogie (V-Twin), Boomerang , Hughs & Kettner, Digitech Whammy, Line 6 Pods, DL4, VoodooLab GCX Switcher a.s.o.
Note to Boomerang pedals: The Flatliner Pro works well with the new Boomerang pedals, which require at least 500mA. You needn't worry about polarity because these pedals accept AC, DC neg tip or DC pos tip. We advise you anyway to use the AC outlet ( Boomerangs need 2.5 mm barrelconnectors (cable SC-AF25).
The Line 6 modelling pedals can be powered through the 9VDC (MM4, FM4) or 12VDC (DM4,DL4) outputs. Since these effects draw more current (150-185 mA) than average you can connect one effect with one output. The FLATLINER can power several Line 6 effects simultanously. Note: Line 6 modelling effects have reversed polarity. Use the right cable.
Dying battery
This option gives creative guitarists the opportunity to simulate the special effect that an almost flattened battery causes in some fuzz and overdrive effects. The FLATLINER's dying battery option provides variable voltages from 3-9V and 3-12V, this in combination with variable output resistances, to achieve the right mix. Learn more about the dying battery option.
Cables
Your FLATLINER comes with 9 cables, 7 regular, different length, 1 for reversed polarity, 1 for AC output.
ราคา 13,000 โทร 02-251-1279
The chassis is made of 2 mm steelplate and covered with rugged black paint.
New style mini LEDs are giving it the familiar Burkey-look on your pedalboard. We have designed an ultra compact toroidal transformer for 6 powerful regulated DC-outlets to guarantee HUMless operation of your effects. A current limiter on each output protects your effects and makes the SIX virtually indestructable and.....it is small indeed. This
Specifications:
6 isolated and regulated outlets, all adjustable in steps to 9, 12, 15 or 18VDC each @ 100 mA
All outputs center - 
230 VAC 50/60 Hz fused 100mAT
115 VAC 50/60 Hz fused 200mAT
CE 2007
Dimensions (whd) = 99x52x85 mm
6 cables (straight and angled connectors) included.
ราคา 8,900 โทร 02-251-1279
